Aircraft in Plastic Decals
[ Page 8 ]
[ Page 8 ]
Custom decals designed by Meindert de Vreeze
.... continued from decal page 7....
On this page, Beechcraft (Super) King Air decals are presented.
Interested in a sheet for personal use? Or if you need another scale, let me know as noted at decal page 1...
DECAL
PAGE 1
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
DECAL SYSTEM
Each decal sheet has one continuous print film, so each decal needs to be cut out with fine scissors.
No other prior decal preparation is needed.
Each cut out decal can be applied as usual after soaking it a short while in water. Decals are VERY THIN, so slide off from the wet backing sheet on a horizontally held GLOSSY model surface.
Note that a decal that contains a white section is often split in two parts. To apply the full decal marking, first set the white decal section at correct position and on top of that the coloured section. On the decals sheet you will often see an “arrow” to indicate this way of application (on white under surfaces, the white section is optional).
After all decals have been applied, finish the model with your preferred final gloss, matt or semi-matt varnish coats. This will also protect all the decals.
The Beechcraft King Air was a small twin-turboprop transport aircraft manufactured in many variants from 1964. The later series had T-tails. This decals sheet is for the King Air 200 registred "PH-SBK" as flown on behalf of the Royal Netherlands Navy "KONINKLIJKE MARINE" flying service from 1998. It has 3-bladed propellers.
(1/72 sheet size about 14x4 cm / 5x2 inch)
DOWNLOAD description sheet AIPD 89In 1/72 the A&A Models King Air kit #7237 is recommended with short fuselage, door and 3-bladed propellers. The MACH2 Beech 200 kit is also quite good and has the needed 3-bladed props.
The Beechcraft King Air 200 C was flown from 1992 by the Hong Kong Government and Royal Hong Kong Auxiliary Air Force. It has a white and gloss red scheme and 3-bladed propellers. A scratch built belly fairing may be needed.
(1/72 sheet size about 17x4 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 90In 1/72 the A&A Models King Air kits #7240/ #7237 are recommended that have short fuselage and provide 3-bladed propellers. The MACH2 Beech King Air 200 kit can also be made. Check the rear door shape.
A single long Beechcraft King Air 350 iER "ES-PKY" is flown by the Estonia "Police and Border Guard" from 2018. The kit needs some scratch made extra's like belly fairing and SLAR radar.
(1/72 sheet size about 17x4 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 91In 1/72 the A&A Models King Air 350 kits #7226/#7243 are recommended with the longer fuselage and 4-bladed propellers.
Look for a made Japan Coast Guard King Air 350 here....
A Beechcraft King Air 350 twin-turboprop transport aircraft was also flown by the Bahamas Defense Force from 2005. "DF-103" is the long cabin King Air 350 and has a gloss white scheme with cheatlines.
(1/72 sheet size about 17x7 cm / 7x3 inch)
DOWNLOAD description sheet AIPD 92In 1/72 the A&A Models King Air 350 kits #7226/#7243 are recommended with the longer fuselage and 4-bladed propellers.
Look for the modelling report on this page....
This decals sheet is for the long King Air 350 as flown by the Guyana Defense Force from 2017 coded "8R-1GY". It has a gloss white scheme with coloured tail and cheatlines.
(1/72 sheet size about 17x10 cm / 7x4 inch)
DOWNLOAD description sheet AIPD 93In 1/72 the A&A Models King Air 350 kits #7226/#7243 are recommended with the longer fuselage and 4-bladed propellers.
Look for the modelling report on this page....
A pair of Beechcraft King Air 350 small twin-turboprop transport aircraft are flown by the "Argentina Prefectura Naval" (Coast Guard). White scheme with blue trim and orange panels, coded "PA-22" or "PA-25".
(1/72 sheet size about 17x6 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 94In 1/72 the A&A Models King Air 350 kits #7226/#7243 are recommended with the longer fuselage and 4-bladed propellers. Check the rear door shape.
A few Beechcraft King Air 300 are flown by the Guatamala Air Force. They have a gloss white scheme and variations in blue cheatlines for the King Air 300, coded "751" or "752".
(1/72 sheet size about 17x8 cm / 7x3 inch)
DOWNLOAD description sheet AIPD 95In 1/72 the A&A Models King Air 300 kits #7224/ #7237/ #7240 are recommended with the short fuselage and 4-bladed propellers. Check the rear door shape.
The Beechcraft King Air was quite popular with the Bolivia Air Force with over 25 planes used in various variants. Decals are for a gloss white King Air 200 with trim coded "FAB-018" flown for over 40 years. It has 3-bladed propellers.
(1/72 sheet size about 17x6 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 96In 1/72 the A&A Models King Air kits #7237 is recommended with short fuselage and 3-bladed propellers. The MACH2 Beech King Air 200 can also be made.
The Beechcraft King Air was also popular in the “Aviación Naval Ecuatoriana”. King Air 350 with long cabin of the A.N.E. coded "AN-235" was still flying in 2023. It has a white and grey scheme.
(1/72 sheet size about 17x5 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 97In 1/72 the A&A Models King Air 350 kits #7226/#7243 are recommended with the longer fuselage and 4-bladed propellers.
Some 5 Beechcraft King Airs were flown by the Burkina Faso “Armée de l'Air Burkinabé”. This included King Air 200 coded "XT-MAX" that has a gloss white scheme with cheatlines.
(1/72 sheet size about 17x5 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 98In 1/72 the A&A Models King Air kits #7224/ #7237/ #7240 are recommended that have short fuselage and provide 4-bladed propellers.
Some 2 King Airs were purchased for the Togo Air Force ”Force Aérienne Togolaise” from 1990. This included Beech King Air 200 coded “5V-MCH”. The overall colour is gloss white with green cheatlines. It has 3-bladed propellers.
(1/72 sheet size about 17x5 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 99In 1/72 the A&A Models King Air kits #7240/ #7237 are recommended that have short fuselage and provide 3-bladed propellers. The MACH2 Beech King Air 200 can also be made.
A pair of Beechcraft King Air were used by the Botswana Defence Force Air Wing. King Air 200 coded "OB1" is gloss white with cheatlines.
(1/72 sheet size about 17x5 cm / 7x2 inch)
DOWNLOAD description sheet AIPD 100In 1/72 the A&A Models King Air kits #7224/ #7237/ #7240 are recommended that have short fuselage and 4-bladed propellers.
A pair of De Havilland DASH 8 are operated on behalf of The Netherlands Coast Guard ("Kustwacht Nederland"). The decals have both C- and PH- registrations of the 2 Dutch aircraft.
(1/72 sheet size about 17x12 cm / 7x5 inch)
(1/144 sheet size about 8x6 cm / 3x2 inch)
DOWNLOAD description sheet AIPD 101In 1/72 there is a rare Hobbycraft Canada DASH 8 kit that can be used.
In 1/144 scale Eastern Express DASH 8 kit #144132 can be used.
A pair of De Havilland DASH 8 are operated on behalf of Coast Guard in The Netherlands Antilles in the Caribbean. The decals have both C- and PH- registrations for the 2 Dutch Caribbean aircraft.
(1/72 sheet size about 17x15 cm / 7x6 inch)
(1/144 sheet size about 8x7 cm / 3x3 inch)
DOWNLOAD description sheet AIPD 102In 1/72 there is a rare Hobbycraft Canada DASH 8 kit that can be used.
In 1/144 scale Eastern Express DASH 8 kit #144132 can be used.
For obtaining a decal sheet, see contact notes...
More decals sheets to follow
(c) Copyright Meindert "designer"/ All rights reserved.
Your comments are welcomed by webmaster
Created this page:
Oct 2, 2024