Aircraft in Plastic Decals
[ Page 10 ]
[ Page 10 ]
Custom decals designed by Meindert de Vreeze
.... continued from decal page 9....
On this page, again various decals sheets are presented.
Interested in a sheet for personal use? Or if you need another scale, let me know as noted at decal page 1...
DECAL
PAGE 1
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
PAGE 9
PAGE 10
DECAL SYSTEM
Each decal sheet has one continuous print film, so each decal needs to be cut out with fine scissors.
No other prior decal preparation is needed.
Each cut out decal can be applied as usual after soaking it a short while in water. Decals are VERY THIN, so slide off from the wet backing sheet on a horizontally held GLOSSY model surface.
Note that a decal that contains a white section is often split in two parts. To apply the full decal marking, first set the white decal section at correct position and on top of that the coloured section. On the decals sheet you will often see an “arrow” to indicate this way of application (on white under surfaces, the white section is optional).
After all decals have been applied, finish the model with your preferred final gloss, matt or semi-matt varnish coats. This will also protect all the decals.
This decals sheet is for a AV-8A of the first Harrier generation of the US Marine Corps (USMC) with the first markings. A few schemes are possible.
(1/32 sheet size about 17x27 cm / 7x11 inch) LARGE SHEET!
(1/24 also possible for Airfix Harrier gr.1 as AV-8A even LARGER!)
(Other scales possible)
USA national insignia and stencils are provided (or use from mother kit).
DOWNLOAD description sheet AIPD 135In 1/32 scale Revell has an old AV-8A Harrier GR.1 kit. For a modelling report of a Thailand AV-8A model look at the modelling report here....
This decals sheet is for a AV-8A of the first Harrier generation of the US Marine Corps (USMC) with the later "toned down" markings. A few schemes are possible.
(1/32 sheet size about 17x18 cm / 7x7 inch)
(1/24 also possible for Airfix Harrier gr.1 as AV-8A)
(Other scales possible)
USA national insignia and stencils are provided (or use from mother kit).
DOWNLOAD description sheet AIPD 136In 1/32 scale Revell has an old AV-8A Harrier GR.1 kit.
(For a similar Thailand navy AV-8A model look at the modelling report here....)
This decals sheet is for the AV-8A(S) Matador of the first Harrier generation of the Spanish Armada air air (naval avaition). A few schemes are possible.
(1/32 sheet size about 17x27 cm / 7x11 inch) LARGE SHEET!
(1/24 also possible for Airfix Harrier gr.1 as AV-8A even LARGER!)
(Other scales possible)
Roundels and stencils are provided (or use from mother kit).
DOWNLOAD description sheet AIPD 137In 1/32 scale Revell has an old AV-8A Harrier GR.1 kit. For a modelling report of a Thailand AV-8A(S) (ex-ARMADA) model look at the modelling report here....
(see for a Thai navy AV-8A(S) see 1/32 decals sheet AIPD-22... )
This decals sheet is for Hawker Siddeley Sea Harrier FRS1 upon introduction with the British Royal Navy (Fleet Air Arm).
(1/32 sheet size about 13x14 cm / 5x6 inch)
(1/24 also possible for Airfix Sea Harrier 17x18 cm / 7x8 inch)
(Other scales possible)
Roundels and stencils are to be used from mother kit or after market
(or provided extra on request).
DOWNLOAD description sheet AIPD 138In 1/32 scale there is no Sea Harrier FRS1 kit. A conversion of the Revell AV-8A Harrier GR.1 kit is needed. A "Tigger" vacuform nose conversion set can be used for that. A 1/32 scale Sea Harrier FRS1 model showing this conversion can be seen in the modelling report here...
This decals sheet is for Hawker Siddeley Sea Harrier FRS1 in British Royal Navy schemes applied when first used by Naval Air Squadrons, 1981/1982. Colours are Extra Dark Sea Grey and white.
(1/32 sheet size about 13x13 cm / 5x5 inch)
(1/24 also possible for Airfix Sea Harrier 17x17 cm / 7x7 inch)
(Other scales possible)
Roundels and stencils are to be used from mother kit or after market
(or provided extra on request).
DOWNLOAD description sheet AIPD 139In 1/32 scale there is no Sea Harrier FRS1 kit. A conversion of the Revell AV-8A Harrier GR.1 kit is needed. A "Tigger" vacuform nose conversion set can be used for that. A 1/32 scale Sea Harrier FRS1 model showing this conversion can be seen in the modelling report here...
This decals sheet is for Hawker Siddeley Sea Harrier FRS1 of the British Royal Navy quickly deployed to the South Atlantic upon outbreak of the Falklands War. The sheet has the codes and includes improvised roundels.
(1/32 sheet size about 13x13 cm / 5x5 inch)
(1/24 also possible for Airfix Sea Harrier 17x17 cm / 7x7 inch)
(Other scales possible)
Stencils are to be used from mother kit (or provided extra on request).
DOWNLOAD description sheet AIPD 140In 1/32 scale there is no Sea Harrier FRS1 kit. A conversion of the Revell AV-8A Harrier GR.1 kit is needed. A "Tigger" vacuform nose conversion set can be used for that. A 1/32 scale Sea Harrier FRS1 model showing this conversion can be seen in the modelling report here...
This decals sheet is for Hawker Siddeley Sea Harrier FRS1 of the British British Royal Navy in grey post-Falklands schemes in overall Dark Sea Grey.
(1/32 sheet size about 12x11 cm / 5x4 inch)
(1/24 also possible for Airfix Sea Harrier 17x15 cm / 7x6 inch)
(Other scales possible)
Roundels and stencils are to be used from mother kit or after market
(or provided on request).
DOWNLOAD description sheet AIPD 142In 1/32 scale there is no Sea Harrier FRS1 kit. A conversion of the Revell AV-8A Harrier GR.1 kit is needed. A "Tigger" vacuform nose conversion set can be used for that. A 1/32 scale Sea Harrier FRS1 model through this conversion can be seen in the modelling report here...
This decals sheet is for Sea Harrier FRS1 "ZA175" of British Royal Navy No.899 NAS in one of their 50th anniversary schemes December 1992.
(1/32 sheet size about 12x21 cm / 5x9 inch)
(1/24 also possible for Airfix Sea Harrier about 17x27 cm / 7x11 inch LARGE)
(Other scales possible)
Stencils are to be used from mother kit (or provided extra on request).
DOWNLOAD description sheet AIPD 143In 1/32 scale there is no Sea Harrier FRS1 kit. A conversion of the Revell AV-8A Harrier GR.1 kit is needed. A "Tigger" vacuform nose conversion set can be used for that. A 1/32 scale Sea Harrier FRS1 model showing this conversion can be seen in the modelling report here...
For obtaining a decals sheet, see contact notes...
More decals sheets to follow
(c) Copyright Meindert "designer"/ All rights reserved.
Your comments are welcomed by webmaster
Created this page:
Jan 28, 2025