Aircraft in Plastic Decals
[ Page 14 ]
[ Page 14 ]
Custom decals designed by Meindert de Vreeze
.... continued from decal page 13....
On this page, again various decals sheets are presented.
Interested in a decals sheet for personal use? Or if you want another scale, let me know as noted at decal page 1...
DECAL
PAGE 1
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
PAGE 9
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
DECAL SYSTEM
Each laser printed decal ssheet has one continuous print film, so each decal needs to be cut out with fine scissors.
No other prior decal preparation is needed.
Each cut out decal can be applied as usual after soaking it a short while in water. Decals are VERY THIN, so slide off from the wet backing sheet on a horizontally held GLOSSY model surface. (decals may contain a white backing).
After all decals have been applied, finish the model with your preferred final gloss, matt or semi-matt varnish coats. This will also protect all the decals.
DECAL SHEET AIPD-190: Fouga Magister CM-170 Belgium Air Force (1/32)
Decals for Belgium Air Force Magisters during their entire career (for Red Devils team see sheet AIPD-191). Choice of various schemes and extensive service stencils included of different time frames. This is a huge sheet. By careful selection, 3 models of 3 different schemes can be made.
(1/32 sheet size about 17x27 cm / 7x13 inch, A4 HUGE SHEET! )
DOWNLOAD description sheet AIPD 190In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
Decals for Belgium Air Force Magisters flown by the Red Devils / Rode Duivels / Diables Rouges aerobatic and display team. Choice of various schemes for 2 models. Airbrushing the complex model scheme is required.
(1/32 sheet size about 17x10 cm / 7x4 inch)
DOWNLOAD description sheet AIPD 191In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for an Irish Air Force Magister flown with a few choices. Includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x12cm / 7x5 inch)
DOWNLOAD description sheet AIPD 192In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for a Magister flown by the Finish Air Force / Ilmavoimat. Choice of several schemes and includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x15cm / 7x6 inch)
Note: does not contain orange dayglow stripes, get these elsewhere.
DOWNLOAD description sheet AIPD 193In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for 1 Austria Air Force Magister with choice of numbers and includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x12 cm / 7x5 inch)
DOWNLOAD description sheet AIPD 194In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
Decals for West-German Air Force Luftwaffe and naval Marine Flieger Magister schemes. Choice of various schemes with extensive service stencils with many number codes. Acrobat team Magister possible but needs colour scheme airbrushing.
+
(1/32 sheet with 2 parts with total size about 17x20 cm / 7x8 inch)
DOWNLOAD description sheet AIPD 195In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for Magisters flown in North Africa: by the Algeria Air Force and the Morocco Air Force. Several schemes and includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x15 cm / 7x6 inch)
DOWNLOAD description sheet AIPD 196In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for Magisters flown in Central Africa: by the short-lived Katanga Air Force, Gabon Air Force "Armée de l'Air
Gabonaise" and Cameroon Air Force "Armée de l'Air du Cameroun". Several schemes and includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x20 cm / 7x8 inch)
DOWNLOAD description sheet AIPD 197In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for Magisters flown in West Africa: by the Senegal Air Force "“Armée de L' Air du Senegal" and Togo Air Force "Armée de l'Air Togolaise". Several schemes and includes stencils.
+ 
(1/32 sheet with 2 parts with total size about 17x20 cm / 7x8 inch)
DOWNLOAD description sheet AIPD 198In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
These decals are for Magisters flown in Asia: for Air Forces of Lebanon, Bangladesh and Cambodia. Several schemes and includes stencils.
+
(1/32 sheet with 2 parts with total size about 17x20 cm / 7x8 inch)
DOWNLOAD description sheet AIPD 199In 1/32 scale DACO from Belgium has the only injection molded Fouga Magister kit that is quite detailed.
No model has yet been made.
For obtaining a decals sheet, see contact notes...
(c) Copyright Meindert "designer"/ All rights reserved.
Your comments are welcomed by webmaster
Created this page:
October 26, 2025