Aircraft in Plastic Decals
[ Page 13 ]
[ Page 13 ]
Custom decals designed by Meindert de Vreeze
.... continued from decal page 12....
On this page, again various decals sheets are presented.
Interested in a sheet for personal use? Or if you need another scale, let me know as noted at decal page 1...
DECAL
PAGE 1
PAGE 2
PAGE 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
PAGE 9
PAGE 10
PAGE 11
PAGE 12
PAGE 13
DECAL SYSTEM
Each decal sheet has one continuous print film, so each decal needs to be cut out with fine scissors.
No other prior decal preparation is needed.
Each cut out decal can be applied as usual after soaking it a short while in water. Decals are VERY THIN, so slide off from the wet backing sheet on a horizontally held GLOSSY model surface.
Note that a decal that contains a white section is often split in two parts. To apply the full decal marking, first set the white decal section at correct position and on top of that the coloured section. On the decals sheet you will often see an “arrow” to indicate this way of application (on white under surfaces, the white section is optional).
After all decals have been applied, finish the model with your preferred final gloss, matt or semi-matt varnish coats. This will also protect all the decals.
The Qatar Air Force uses several high performance PC-21 trainers and a few are used by the Air Academy for demonstrations.
(1/72 sheet size about 17x8 cm / 7x3 inch)
DOWNLOAD description sheet AIPD 171In 1/72 scale 3D Blitz has an injection molded PC-21 kit.
Look for a modelling report here on the website...
The Qatar Air Force uses several high performance PC-21 trainers. The decals are for the standard scheme.
(1/72 sheet size about 17x6 cm / 7x3 inch)
DOWNLOAD description sheet AIPD 172In 1/72 scale 3D Blitz has an injection molded PC-21 kit.
Look for a modelling report here on the website...
The Bangladesh Air Force probably operates over 80 PT-6 trainers, the export version of the CJ-6. Decals are for a few schemes.
(1/32 sheet size about 17x8 cm/ 7x3 inch)
(1/48 sheet size about 11x5 cm/ 5x2 inch)
DOWNLOAD description sheet AIPD 175In 1/32 scale Trumpeter China Nanchang CJ-6 kit #02240.
In 1/48 scale Trumpeter Nanchang CJ-6 kit #02887.
The Sri Lanka Air Force no.1 Flying Training Wing operates over 30 PT-6 trainers. Decals are for a few schemes.
(1/32 sheet size about 17x6 cm/ 7x3 inch)
(1/48 sheet size about 11x4 cm/ 5x2 inch)
DOWNLOAD description sheet AIPD 176In 1/32 scale Trumpeter China Nanchang CJ-6 kit #02240.
In 1/48 scale Trumpeter Nanchang CJ-6 kit #02887.
The Myanmar Air Force (former Burma) probably operates over 50 CJ-6/ PT-6 trainers. Choice of a few codes.
(1/32 sheet size about 17x6 cm/ 7x3 inch)
(1/48 sheet size about 11x4 cm/ 5x2 inch)
DOWNLOAD description sheet AIPD 177In 1/32 scale Trumpeter China Nanchang CJ-6 kit #02240.
In 1/48 scale Trumpeter Nanchang CJ-6 kit #02887.
The Albania Air Force probably operated some 22 CJ-6/ PT-6 trainers. Choice of a 2 codes.
(1/32 sheet size about 17x3 cm/ 7x1 inch)
(1/48 sheet size about 11x2 cm/ 5x1 inch)
DOWNLOAD description sheet AIPD 178In 1/32 scale Trumpeter China Nanchang CJ-6 kit #02240.
In 1/48 scale Trumpeter Nanchang CJ-6 kit #02887.
The Sudan Air Force probably operated a dozen PT-6 trainers from Port Sudan air base. Choice of 2 codes.
(1/32 sheet size about 17x4 cm/ 7x2 inch)
(1/48 sheet size about 11x3 cm/ 5x1 inch)
DOWNLOAD description sheet AIPD 179In 1/32 scale Trumpeter China Nanchang CJ-6 kit #02240.
In 1/48 scale Trumpeter Nanchang CJ-6 kit #02887.
For obtaining a decals sheet, see contact notes...
(c) Copyright Meindert "designer"/ All rights reserved.
Your comments are welcomed by webmaster
Created this page:
July 9, 2025